My wife decided recently that she wanted a handgun to carry
for self defense, so we started doing a little research and window shopping to
try a pick out a good one. We pretty
much decided to go with an auto-loader for magazine capacity, and we talked
some about caliber. We considered both
.380 and 9mm. Many .380’s are more
compact and it’s a slightly tamer round than the 9mm, but my wife wasn’t concerned
too much about recoil. She regularly
shoots my .357 revolver so she knew that the 9mm wouldn’t be a problem. Our main concern was the thickness of the
grip. She shot my Taurus PT-92 and found
that it didn’t feel comfortable in her hand.
The grip was just too bulky, and her thumb couldn’t reach the left side
magazine release button. She fired my
brother-in-law’s Ruger LCP .380, but she felt that it was too small and she was
concerned about the stopping power of the lighter round. So we pretty much decided on a 9mm; it was
just a matter of finding one with a double stack magazine that would fit her
hand. A 9mm would have the added bonus
of being kind of a family standard round.
I have a 9mm, my son has a 9mm, my brother-in-law has a 9mm, and my
son-in-law has a 9mm; so when we get a good deal on ammo we can buy in bulk (no
good deals lately).
So we knew that we were looking for a 9mm auto loader with a
high capacity magazine. The next step
was to go to the gun shop and try a few on for size. We tried a Beretta, a Glock, a Sig, a Springfield, a Kel-Tec,
and a Smith and Wesson. The Smith and
Wesson SD9VE was the best fit. We held the SD9VE up next to a couple of the
other nines and determined that the difference in size was due to the thinner
slabs on the grip. The body of the grip
was the same width as the other pistols, so it had no problem holding a double
stack magazine.
The only thing that worried me a little was that, with the
exception of the Kel-Tec, it was considerably less expensive than the
others. I didn’t want my wife trusting
her life to a junker (although I have never heard of a Smith and Wesson
junker), so it was time to do a little inter-net research.
The reviews that I read and watched were nearly all
positive. There were some concerns
expressed about durability of the slide guide-rod since it is polymer rather
than steel; and several noted that the SD9 has no safety. But all reviewers seemed to agree that it was
a sweet shooter and fed all brands of ammo with great reliability. I was interested to read that Glock had
actually sued Smith and Wesson over the design of this pistol, and I can see
why they did. I held it up next to my
son’-in-law’s Glock and it looked almost like a twin. Glock lost the law suit, by the way.
So here’s the basic info on the Smith and Wesson SD9VE:
The Smith and Wesson SD9VE is a medium size auto loading
pistol with a polymer frame and a stainless steel slide and barrel. The barrel is four inches long. The SD9VE is chambered for 9mm parabellum. It has a double stack magazine with 16 rounds
capacity.
View holes on the sides of the magazine allow you to see how
many rounds are in the mag. The SD9VE is
striker fired so there is no exposed hammer.
Every shot is double action, and the trigger has about a
seven pound pull. There is no safety on
this firearm. It will still fire without
the magazine inserted. The SD9VE is 1.5
inches wide, 7.2 inches long, and weighs 22.7 ounces without the magazine. The sights are fixed with a white dot on the
front post and to each side of the rear notch.
There is a small rail under the barrel that can be used for
mounting a laser or light.
The body of the SD9VE is black and the slide is dull
silver-gray. The slide is deeply
textured for easy grip when chambering a round.
The slide release and magazine release are both located
within easy reach on the left side of the frame.
One feature that I particularly like is a small half-moon
view port on the back of the chamber that enables you to see, without pulling
the slide back, if there is a round in the chamber.
To disassemble the SD9VE for cleaning; make sure the chamber
is empty, pull the trigger to drop the striker, and remove the magazine.
Pull the
slide back slightly, pull down the small pins located on both sides of the
slide.
Push the slide forward to remove it from the frame.
Remove the the slide spring and guide rod.
And, finally, remove the barrel.
My personal impression of the SD9VE is that it appears to be
a good solid, reliable firearm. The
price is very reasonable. Both my wife
and I fired several magazines through it.
The trigger pull did not fell too stiff to either one of us, and every
round fed without problem. Magazines
transitions were smooth and easy, and accuracy was good. Of course, this firearm is not nearly as
rugged as my all metal PT-92, but we are not anticipating prolonged field carry
or huge volumes of fire. This firearm is
plenty rugged enough and plenty reliable enough for civilian defense
purposes. It is a great gun for the
money, indeed it is the easy equivalent of guns that cost much more. I would recommend it to anyone.