To start off making a boomerang you will need to do a little searching for just the right piece of wood. You need to find a tree limb that is about three inches in diameter and has a nice natural curve in it. It is best to use hardwood, and it needs to be fairly knot free. When you have located a good limb, cut about a three foot section of it with the curve centered as nearly as possible. You won't use the whole three feet for your boomerang; but the ends may split a little when drying, and it doesn't hurt to have a little extra wood to work with. Put your limb up in a warm, dry place and let it season for a few weeks.
When the wood is dry it is time to go to work. Unless you are willing to do a lot of whittling, it is nice to have an axe to get you started on roughing out a boomerang. Rough out your boomerang by thinning down the top and bottom of the limb to a thickness of about one inch. Leave the blade of the boomerang the full width of the limb. When you have finished with this process you should have what amounts to a one inch thick by three inch wide board with a curve in the middle.
Now you can take your knife and finish out the final shape of the boomerang. One end needs to be narrowed down and rounded off to form a handle. The length of the blade should be left one inch thick in the middle, and tapered down to a rounded edge on each side. Don't make the edges too thin or they will be damaged when the boomerang smacks into a rock or tree.
A little scrapping with the edge of your knife will smooth out the finish and make it look nice. I like to rub my boomerang down with some grease or vegetable oil to give it a nice finish and help protect the wood.
the Australian boomerang, if they return, but they have a lot of practice to aim the trajectory curve, in fact boomerang australian language means "cane back again"
ReplyDeleteNice article on a pratical hunting tool.
ReplyDeleteI wanted to correct the above comment made by gabriel, who didn't have his information correct.
"Boomerang" basically means "Do not know." "Boomerang" was never what the Aborigines called their throwing sticks, in any of the many aboriginal dialects. It doesn't mean "cane back again". It was an oblivious response given to the Europeans who asked them what they called their strange throwing sticks. Ref. Felix Hess Boomerange Aerodynamics And Motion, 1975.
The Australian "Karli" hunting sticks from the Central Desert were capable of perfectly straight and level flights of 60+ Meters for hunting Emu. Actually 150+ meters flights is possible with full sized 1lb sticks which are tuned efficiently. Karli are thrown horizontally and hover over the earth on a straight laser beam like flight path to their target.
The California Rabbit sticks were not quite to the same quality as the Aboriginal examples, but were excellent for putting meat on the table.
In either case, the elegance of the weapon is the simplicity, fast deployment and instinctive accuracy.
Ben